Top 5 Editorial Picks
Five current picks chosen for distinct deep drop needs — from a sonar-first 7-inch unit to a premium expandable system and our top electric reel. These are editorial selections, not ratings.
As an Amazon Associate, we earn from qualifying purchases.
Simrad NSS9 evo3S Review: A 1kW CHIRP Helm Hub Stated to 3,000 ft+
DeepDropFishing.com is reader-supported. When you buy through links on our site, we may earn a commission at no extra cost to you. This review is based on the manufacturer’s published specifications.

Quick Answer
The Simrad NSS9 evo3S is a 9-inch multifunction chartplotter/fish finder built as the hub of a whole boat system: a 1280 x 720 SolarMAX IPS touchscreen with keypad and rotary dial backup, a built-in 1kW CHIRP echosounder with dual transducer ports, preloaded C-MAP US Enhanced charts, and full radar, autopilot and engine integration. The number that matters for our readers: Simrad states a sonar max depth of 3000’+ (tested with B175L) at 1kW RMS output — genuine deep-drop range on paper, provided you pair the display with a 1kW low-frequency transducer of that class, because the US model ships with no transducer in the box.
One generation note before anything else: the NSS9 evo3S is still listed and sold by Simrad, but Simrad’s newer NSS line now sits above it as the current premium generation. The evo3S is the proven previous generation — worth buying on its specs and system fit, as long as you go in knowing it is not the newest platform.
Who the NSS9 evo3S Is For
This is not a standalone fish finder in the simple sense — it is a networked helm display that happens to carry a serious built-in sounder. Simrad pitches the NSS9 evo3S as an all-in-one premium chartplotter designed to excel as a central hub, and the spec backs that up: Ethernet and NMEA 2000 networking, HALO radar and autopilot control, engine and fuel monitoring, and two sonar ports on a 9-inch screen sized for center consoles and other powerboats.
For deep drop readers specifically, the appeal is the sounder specification. Most 9-inch displays top out at imaging-sonar depths; this one publishes a 1kW RMS output and a 3,000 ft+ stated sonar depth with the right transducer. If you are building one integrated Simrad helm — chartplotter, radar, autopilot and a deep-capable sounder on one screen — this is the class of unit you are shopping for. It also features in our Best Fish Finder for Deep Drop Fishing guide, and our Deep Drop Fishing Electronics Setup guide shows how a display like this fits into a complete system.
Key Specs
| Spec | Simrad NSS9 evo3S |
|---|---|
| Display | 9″ SolarMAX IPS, 1280 x 720, 1200 nits |
| Controls | Touchscreen or keypad with rotary dial |
| Processor | iMX 8 integrated six-core processor |
| Sonar | Built-in 1kW CHIRP-enabled echosounder, dual-channel CHIRP support |
| Sonar frequencies | 40-250kHz, 455-800kHz |
| Sonar output power | 1kW RMS |
| Max depth (manufacturer stated) | 3000’+ (tested with B175L) — sonar figure, transducer-dependent |
| Sonar ports | Two 9-pin Xsonic ports |
| Transducer included | None (US model — “just add your choice of transducer”) |
| GPS / charts | Built-in 10 Hz GNSS receiver; preloaded C-MAP US Enhanced charts; C-MAP REVEAL and DISCOVER supported |
| Storage | 6000 waypoints, 500 routes, 50 tracks |
| Card slots | 2 x MicroSD, max. 32GB each |
| Networking | 1 x Ethernet (10/100 Mbit), 1 x NMEA 2000 Micro-C port, built-in Wi-Fi |
| Power | 10 – 31.2 V DC; 21 W max consumption; 5A fuse recommended |
| Dimensions | 287 x 166 x 90 mm (11.30 x 6.55 x 3.50″) |
| Weight | 1.41 kg (3.11 lbs.) |
| Waterproofing | IPX6 and 7 |
The Display: SolarMAX IPS With Touch and Keypad
The 9-inch SolarMAX IPS screen runs at 1280 x 720 with 1200 nits of brightness and 80-degree viewing angles in every direction. Simrad designs the panel to stay readable through polarized sunglasses, and the display is optically bonded to prevent condensation or fogging inside the glass — both real considerations on an open center console.
Control is hybrid: an all-weather touchscreen when conditions allow, and a keypad with a rotary dial when they don’t. Menus, customisable split-screen layouts and a programmable function key round out the interface, and the iMX 8 six-core processor is there to keep page loads and screen transitions fast when you are running chart, sonar and radar splits at once.
Sonar: Built-In 1kW CHIRP With Two Transducer Ports
The built-in echosounder is the heart of this unit for anglers. It is 1kW CHIRP-enabled, supports dual-channel CHIRP transducers — two frequency bands delivering multiple depth range coverage from a single unit — and offers dual transducer ports, so two transducers can connect to one display. Per Simrad’s specification, port 1 handles single channel CHIRP, 50/200 khz and HDI; port 2 handles single channel CHIRP, 50/200 khz, TotalScan, LSS HD and ForwardScan, and the unit is also compatible with SonarHub, BSM-3, BSM-2 and network echo sounders.
Around that core, the platform powers Simrad’s wider sonar family: ActiveTarget live sonar, Active Imaging (CHIRP, SideScan and DownScan Imaging from a single transducer), StructureScan 3D and ForwardScan — each needing its own transducer or module. For sportfishing systems that outgrow the built-in sounder, the S5100 sonar module adds three independent 3kW channels. Our Best Transducer for Deep Drop Fishing guide explains why, on a unit like this, the transducer you choose does more to decide your real depth performance than the display does.
Charts, Networking, Radar and Autopilot
Charting on the US model starts with preloaded C-MAP US Enhanced charts: high-resolution inland and coastal coverage with high resolution bathymetry at 1 foot contours, a C-MAP Reveal layer embedded for Florida, and Easy-Routing. C-MAP REVEAL and DISCOVER cards are supported, alongside a range of third-party chart vendors. The built-in 10 Hz GNSS receiver (GPS and GLONASS, with support for Galileo, Beidou and QZSS combinations and SBAS corrections) holds up to 6,000 waypoints, 500 routes and 50 tracks, and TripIntel supports route planning and automatic routing.
Networking is where the evo3S separates itself from fish-finder-first units like the Simrad GO9 XSE. One Ethernet port and one NMEA 2000 port tie it into multi-display systems; built-in Wi-Fi mirrors the display to iOS and Android devices and handles online software updates. Simrad HALO Pulse Compression radar and Simrad autopilots are controlled from the screen, with SteadySteer support for NAC-2 and NAC-3 autopilots fitted with RPU drive pumps. Third-party integration covers CZone digital switching, Mercury VesselView engine and fuel monitoring, and Mercury Smart Tow. Compare that hub role with a sonar-led alternative in our Lowrance HDS PRO 10 review — the HDS PRO is the sister-brand take on the same idea — or with the simpler chartplotter approach in our Garmin ECHOMAP UHD2 73sv review.
Deep-Water Use: The 3,000 ft Figure, Read Carefully
This is the section that matters most on this site, so let’s work only with Simrad’s own numbers. Simrad states: sonar frequencies 40-250kHz 455-800kHz, sonar output power 1kW RMS, and sonar max depth 3000’+ (tested with B175L).
Three honest points follow from how Simrad itself writes that spec. First, the depth figure belongs to the sonar system, not the display — Simrad publishes no max depth for the unit on its own, because depth here is a function of the transducer. Second, the transducer named in the test is the B175L, a 1kW low-frequency CHIRP thru-hull: the low end of the unit’s 40-250kHz band is doing the deep work. Pair the NSS9 evo3S with a small transom-mount imaging transducer instead, and you should not expect anything like the stated figure. Third, even read at face value, 3,000 ft + covers the whole realistic deep drop fishery — tilefish, snowy grouper, queen snapper and daytime swordfish bottom work all live well inside it.
The practical buying consequence: budget the transducer as part of this purchase, not as an accessory. The display’s 1kW RMS output and dual ports give you the headroom; a 1kW low-frequency thru-hull is what turns that headroom into bottom contact at deep drop depths. The imaging side of the sonar (SideScan and DownScan, in the 455-800kHz band) carries no published depth rating in Simrad’s NSS9 evo3S specifications, so treat imaging as a shallow-to-midwater tool and the low-frequency CHIRP as the deep tool — the same split as every other unit in this class.
What’s in the Box / What You Still Need
The US model (NSS9 evo3S with C-MAP US Enhanced Charts) is the display unit with the C-MAP US Enhanced charts preloaded — and, in Simrad’s own words, “just add your choice of transducer”: no transducer is included. Beyond the box, budget for:
- A transducer — the essential missing piece. For deep drop work, a 1kW low-frequency CHIRP thru-hull of the class Simrad tested with; an Active Imaging transducer instead if imaging is your priority.
- MicroSD cards (up to 32 GB each, two slots) for chart cards, sonar logs and waypoint backups.
- A fused 12/24 V supply run — Simrad specifies a supply voltage of 10 – 31.2 V DC and a recommended 5A fuse rating.
- NMEA 2000 backbone components, Ethernet cabling, radar or autopilot hardware if you plan to use the integration the display is built for — all sold separately.
- Mounting: panel mount, or the bracket arrangement (Simrad lists dimensions both ways: 287 x 166 x 90 mm, and 311 x 180 x 95 with bracket).
Who Should Buy / Who Should Skip
Buy the NSS9 evo3S if you are building an integrated Simrad helm on a center console or similar powerboat and want chartplotter, radar, autopilot and engine data on one 9-inch screen; if you need a built-in sounder with 1kW RMS output, dual transducer ports and a manufacturer-stated 3,000 ft+ sonar depth to build a deep drop system around; or if you are already invested in Simrad accessories and want the previous generation’s proven platform.
Skip the NSS9 evo3S if you want Simrad’s newest platform — the current NSS line above it is the forward-looking buy; if you want a transducer in the box and sonar working the day it arrives (this US model includes none); or if all you need is a simple standalone fish finder, where a unit built only for sonar will do the job with far less system around it.
FAQ
How deep can the Simrad NSS9 evo3S read?
Simrad states a sonar max depth of 3000’+ (tested with B175L), with 1kW RMS sonar output power. That figure is for the sonar paired with that 1kW low-frequency transducer — Simrad publishes no max depth for the display unit alone, and your real depth will depend on the transducer you fit.
Does the NSS9 evo3S come with a transducer?
No. The US model is sold without one — Simrad’s product page says “just add your choice of transducer.” The display has two 9-pin Xsonic sonar ports and supports dual-channel CHIRP transducers.
Is the NSS9 evo3S discontinued?
No. As of this review it is still listed for sale on Simrad’s official site with no discontinued marking (the older NSS evo3 carries that marking; the evo3S does not). It is, however, the previous generation — Simrad’s newer NSS line is now the current premium range.
What charts does the NSS9 evo3S come with?
The US model comes with preloaded C-MAP US Enhanced charts with high-resolution inland and coastal coverage, 1 foot contour bathymetry, C-MAP Reveal embedded for Florida and Easy-Routing. It also supports C-MAP REVEAL and DISCOVER cards and a range of third-party chart vendors.
Is the NSS9 evo3S a touchscreen?
Yes — an all-weather touchscreen — but it also has a keypad with a rotary dial, so you can run it by touch or by keys as conditions demand.
Can the NSS9 evo3S run radar and autopilot?
Yes. It integrates with Simrad HALO Pulse Compression radar and Simrad autopilot products, including SteadySteer support for NAC-2 and NAC-3 autopilots with RPU drive pumps, plus CZone digital switching and Mercury VesselView engine and fuel monitoring.
Is the NSS9 evo3S enough for deep drop fishing?
On Simrad’s published figures, yes — with the right transducer. The built-in sounder outputs 1kW RMS across a 40-250kHz band, and Simrad states 3000’+ sonar depth tested with a B175L 1kW low-frequency thru-hull. Fitted with a transducer of that class, the stated capability covers deep drop depths; fitted with a small imaging transducer, it will not.
The Bottom Line
The NSS9 evo3S is a system display first and a fish finder second — and for deep drop anglers that is precisely its strength. Simrad’s published sounder spec (1kW RMS, dual transducer ports, 3000’+ stated depth with a B175L-class transducer) gives it real deep-water headroom that most 9-inch units never claim, wrapped in the networking, radar and autopilot integration of a full helm hub. Buy it knowing two things: the transducer that unlocks the depth figure is a separate, essential purchase, and Simrad’s newer NSS line is the current generation. On its own published numbers, it remains a serious foundation for a deep drop electronics system.