Top 5 Editorial Picks
Five current picks chosen for distinct deep drop needs — from a sonar-first 7-inch unit to a premium expandable system and our top electric reel. These are editorial selections, not ratings.
As an Amazon Associate, we earn from qualifying purchases.
Simrad GO9 XSE Review
Disclosure: DeepDropFishing.com is reader-supported. When you buy through links on this page, we may earn a commission at no extra cost to you. Prices and availability change — we check the details against the manufacturer’s published specifications.

Quick Answer: The Simrad GO9 XSE is a 9-inch touchscreen chartplotter with a built-in GPS, a built-in CHIRP echosounder, Wi-Fi and NMEA 2000 networking. Bought with the Active Imaging 3-in-1 transducer, it adds SideScan and DownScan imaging, and Simrad rates that transducer’s traditional CHIRP sonar to 1,000 ft — enough for mid-depth bottom fishing, but short of true deep-drop range. For genuine deep-drop work (600 ft and beyond, all day), plan on pairing the GO9 with a low-frequency thru-hull transducer. Buy it as a navigation-first helm display that fishes well; look elsewhere if a dedicated deep-water sounder is your first priority.
Who the GO9 XSE is for
The GO series is Simrad’s line for sportboats, dayboats and smaller center consoles, and the GO9 XSE is the 9-inch member of that family. Where a pure fish finder puts sonar first, the GO9 puts the whole helm first: charts, radar, autopilot, engine data and sonar all run through one multi-touch screen that works like a tablet.
For offshore and deep-drop anglers, the honest pitch is this: the GO9 is an excellent command center for a center console, and a capable fish finder in the depths where most bottom fishing happens. Its built-in sounder supports CHIRP and traditional transducers as well as imaging transducers, so the same display can grow from the in-box transducer to a serious thru-hull setup. Where it sits in the wider market is covered in our guide to the best fish finder for deep drop fishing.
Key specs
| Spec | Simrad GO9 XSE |
|---|---|
| Display | 9-inch widescreen multi-touch touchscreen, sunlight-viewable |
| GPS | Built-in receiver, 10 Hz |
| Charts included (chart bundles) | C-MAP DISCOVER (US & Canada) with 12 months of free online updates |
| Chart options | C-MAP, Navionics, Florida Marine Tracks, CMOR Mapping, StrikeLines |
| Built-in sonar | Broadband Sounder, CHIRP sonar, StructureScan HD (SideScan/DownScan), ForwardScan support (transducer required) |
| Bundle transducers | Active Imaging 3-in-1 (CHIRP + SideScan + DownScan) or HDI Skimmer (CHIRP + DownScan); also sold with no transducer |
| Max depth (manufacturer-stated) | Active Imaging 3-in-1: 1,000 ft traditional CHIRP; 300 ft DownScan; 300 ft per side SideScan at 455 kHz |
| Networking | NMEA 2000, built-in Wi-Fi (display mirroring, software updates) |
| Radar | Supports Simrad Broadband 3G/4G and HALO20 / HALO20+ / HALO24 |
| Card slots | Dual microSD |
| Mounting | Flush mount or bracket mount |
Display & charts
Everything on the GO9 runs through the touchscreen. The home screen is customizable, split-screen views let you watch chart and sonar together, and waypoints are marked with a touch — a familiar, phone-like way of working that needs very little learning time on a rocking boat.
Navigation is a strength. The built-in GPS receiver updates at 10 Hz, and chart bundles include C-MAP DISCOVER for the US and Canada: vector charts with custom depth shading, tides and currents, and high-resolution bathymetry that folds in C-MAP Genesis data. C-MAP Easy Routing plans routes the way a car sat-nav does, and the first 12 months of chart updates are free. If you prefer other cartography, the unit also accepts Navionics, Florida Marine Tracks, CMOR Mapping and StrikeLines charts on its dual microSD slots.
Built-in Wi-Fi mirrors the display to a phone or tablet, so a second crew member can watch the sonar away from the helm, and software updates come down through a hotspot instead of a card shuffle.
Sonar & transducer
The echosounder is built into the display, so what the GO9 “sees” depends entirely on the transducer bundled or added:
- Active Imaging 3-in-1 (transom mount): one transducer delivering CHIRP sonar, SideScan and DownScan Imaging. Per Simrad, its conventional sonar runs medium/high CHIRP at 83/200 kHz and its imaging at 455/800 kHz. FishReveal overlays CHIRP fish targets on the DownScan picture, which makes it easier to tell fish from structure.
- HDI Skimmer (transom mount): CHIRP sonar plus DownScan Imaging, without SideScan — the simpler, depth-and-fish bundle.
- No-transducer version: for boats that already have a transducer, or that will be fitted with a thru-hull from the start.
Beyond the bundles, the built-in sounder supports CHIRP and traditional sonar transducers and ForwardScan (a forward-looking navigation sonar, with its own transducer). That transducer flexibility is the GO9’s saving grace for offshore work — see the next section, and our best transducer for deep drop fishing guide for how to choose.
Deep-water use
This is where buyers need the clear picture, because Simrad does not publish a maximum-depth rating for the GO9 XSE display itself. Depth capability is set by the transducer, and Simrad’s own installation manual for the Active Imaging 3-in-1 states its limits plainly: traditional CHIRP sonar to 1,000 ft (305 m), DownScan imaging to 300 ft (91 m), and SideScan range of 300 ft per side at 455 kHz.
Read that carefully. In 200–600 ft of water — wreck fishing, snapper and grouper bottom, most “deep” fishing that isn’t true deep drop — the bundled 3-in-1 covers you with a depth reading, a bottom picture and fish targets. The imaging views, though, give up below 300 ft, and at genuine deep-drop depths of 800–1,500 ft even the bundled transducer’s 2D sonar is at or past its stated limit.
The practical deep-drop path with a GO9 is a low-frequency thru-hull CHIRP or traditional transducer, which the display’s built-in Broadband/CHIRP sounder is built to run. Budget for that upgrade if deep drop is the main mission; treat the bundled transom transducer as your inshore-to-mid-depth tool.
What’s in the box
The GO9 XSE is sold in bundle versions rather than one fixed package:
- GO9 XSE with Active Imaging 3-in-1 — display plus the transom-mount 3-in-1 transducer and C-MAP DISCOVER chart.
- GO9 XSE with HDI — display plus the HDI Skimmer transducer and C-MAP DISCOVER chart.
- GO9 XSE with no transducer — display and chart only; transducer bought separately.
- A bundle pairing the display with a HALO20+ radar also appears in Simrad’s range.
Check the bundle name carefully before ordering — the sonar you get is decided by which box you buy.
Who should buy / who should skip
Buy the GO9 XSE if you run a sportboat or center console and want one screen to handle charts, radar, autopilot and engine data as well as fishing; if your bottom fishing mostly happens inside 600 ft; or if you plan to grow into a thru-hull transducer and want a display that won’t need replacing when you do.
Skip it if deep drop is your primary fishing and you want maximum stated depth out of the box — a sounder-first unit (and the right low-frequency transducer) will serve you better. Also skip it if all you want is a straightforward fish finder on a smaller screen and budget; the Garmin STRIKER Vivid 7sv is a simpler, fish-finder-first tool. And if detailed imaging is your top priority in a 9-inch unit, compare the Humminbird XPLORE 9 before deciding.
FAQ
Does the Simrad GO9 XSE come with a transducer?
It depends on the bundle. The Active Imaging 3-in-1 and HDI versions include a transom-mount transducer; a no-transducer version is also sold for boats that already have one or will fit a thru-hull.
How deep can the GO9 XSE read?
Simrad rates the display’s bundled Active Imaging 3-in-1 transducer — not the display itself — at 1,000 ft for traditional CHIRP sonar and 300 ft for DownScan imaging, per Simrad’s installation manual for that transducer. Deeper work needs a low-frequency transducer matched to the built-in sounder.
What charts are included with the GO9 XSE?
Chart bundles include C-MAP DISCOVER covering the US and Canada, with vector charts, custom depth shading, tides and currents, high-resolution bathymetry and 12 months of free online updates. Navionics, Florida Marine Tracks, CMOR Mapping and StrikeLines charts are also compatible.
Can I add radar to the GO9 XSE?
Yes. Radar support starts at the GO7 in this series, and the GO9 works as a display for Simrad Broadband 3G/4G and HALO20, HALO20+ and HALO24 pulse-compression radars.
Can the GO9 XSE show engine data or control an autopilot?
Yes. Through its NMEA 2000 networking it can display engine performance and fuel data and control a compatible Simrad autopilot (including SteadySteer with compatible drive pumps), and its built-in Wi-Fi mirrors the screen to a phone or tablet.
Bottom line: The GO9 XSE is best understood as a helm upgrade that fishes — a bright, fast, well-connected chartplotter whose sonar is genuinely useful to about 600 ft as bundled, and which has a clear upgrade path for deeper work. Buy it for the whole-boat picture, and budget the thru-hull transducer if deep drop is the plan.